Versalift manufactures bucket trucks, aerial lifts, cable placers, and digger derricks that safely maximizes the capabilities and efficiencies of fleets and improves the bottom lines of end-user organizations. Versalift delivers safe, reliable, high quality machines that stand up to the test of time.
Versalift Equipment
TMD-2047-T
• 47′ Sheave Height
• 18″ Auger, Bumper Winch
TMD-4050-T
• 50′ Sheave Height
• 18″ Auger, Bumper Winch
TMD-4060T
• 60′ Sheave Height
• 24″ Auger, Bumper Winch
VANTEL-29-NE
• Non-Insulated, Inverter
VTP-40-NE
• Telecom Cable Placer
VST-7500-E108
• Elevator Lift, Material Handler
VST-6000-MHI
• Tele/Articulating, Material Handler
VN-555-MHI
• NonOverCenter, Material Handler
VST-47-MHI
• Material Handler, Outriggers
CTA-104-I
• Cat A Ready & Cat A Capable Available
• 1,500lb Material Handler Capacity
CTA-130-I
• Cat A Ready & Cat A Capable Available
• 1,500lb Material Handler Capacity
SST-40-EIH
• Torsion Bar System
VST-40-MHI
• Working Height: 45 ft.
• Horizontal Reach: 30 ft.
• Platform Capacity: 400 lbs.
VST-7100-MHI
• Working Height: 76 ft.
• Horizontal Reach: 42 ft.
• Platform Capacity: 700 lbs.
Versalift Equipment
TMD-2047-T
• 47′ Sheave Height
• 18″ Auger, Bumper Winch
TMD-4050-T
• 50′ Sheave Height
• 18″ Auger, Bumper Winch
TMD-4060T
• 60′ Sheave Height
• 24″ Auger, Bumper Winch
VANTEL-29-NE
• Non-Insulated, Inverter
VTP-40-NE
• Telecom Cable Placer
VST-7500-E108
• Elevator Lift, Material Handler
VST-6000-MHI
• Tele/Articulating, Material Handler
VN-555-MHI
• NonOverCenter, Material Handler
VST-47-MHI
• Material Handler, Outriggers
CTA-104-I
• Cat A Ready & Cat A Capable Available
• 1,500lb Material Handler Capacity
CTA-130-I
• Cat A Ready & Cat A Capable Available
• 1,500lb Material Handler Capacity
SST-40-EIH
• Torsion Bar System
VST-40-MHI
• Working Height: 45 ft.
• Horizontal Reach: 30 ft.
• Platform Capacity: 400 lbs.
VST-7100-MHI
• Working Height: 76 ft.
• Horizontal Reach: 42 ft.
• Platform Capacity: 700 lbs.
Safety is a TOP PRIORITY.
With operators or lift boom tips easily coming into contact with electrical phases through the upper controls, severe injury and/or death is not only possible, but a safety risk you cannot afford in the lives of your operators and your business. In the past, lift companies have offered a solution of plastic handles for the protection of the upper controls.However, these handles still provide only limited safety with dirt and grime contamination, breakage and frequent repair, and incomplete electrical blockage.
WHY IS TRUGUARD® DIFFERENT?
With TruGuard®, you are able to offer your lift operators unprecedented security and safety while working near electrical phases. Our world-class engineers have created a uniquely engineered polymer with high dielectric properties and ultra high strength. By isolating the entire area, TruGuard® is the only true upper control safety panel that protects all control handles at the upper control, as well as hydraulic tool power ports, and the console area itself. Giving you the power you want when operating your lift, TruGuard®’s full hydraulic controls with durable metal handles are long lasting and preferred both by mechanics and operators. TruGuard® passes ANSI A92.2 by resisting the dirt and grime you’ll encounter throughout the life of your lift, giving you greater security. We’ve tested it in every challenging situation you’ll ever face on the job, along with high
pressure and extreme temperatures—and it’s exceeded all expectations, including ours.
We know it will exceed yours, too.