Back to enz Nozzles Products
Percussion Milling Head Cutte
These tools are a radical innovation for milling-off deposits in pipes. The enz® impact milling cutters are designed to remove the most stubborn deposits like concrete, injection cement, mineral deposits etc. They work with a percussion system of 600-3000 impulses per minute and up to 12 tons of impact force. Please ask for special equipment for plastic deposits! When using the pull rod (drawing device) the cutters can be driven with half the water quantity (from 200 mm).
All impact milling cutters can be operated without impacts.
Characteristics:
- superior performance compared to other cutters
- extended tooth life
- easy handling
- low maintenance cost
- proven design
| Model # | #14150 | #14200* | #14300* |
|---|---|---|---|
| Connecting Thread | 1 in. | 1 or 1 1/4 in. | 1 or 1 1/4 in. |
| Pipe Range | 6 in. | 8 in. | 12 in. |
| Min. GPM | 40 GPM @ 1,450 PSI | 52 GPM @ 1,450 PSI | 66 GPM @ 1,450 PSI |
| Max. Pressure | 2,175 PSI | 2,175 PSI | 2,175 PSI |
*Body can be converted to the following by using different heads.
Related Products
RGS Rotating Nozzles
Standard cleaning nozzles
Wire rope and chain scrapers
