TSE T100-72
The TSE Model T100-72 Bullwheel tensioner that can handle a variety of conductors and offers the precision to make sure the job is done correctly. It features a tandem axel trailer with electric brakes.. Featuring a continuous tension capacity of 10,000 lbs. at 4 miles per hour, JDC has the solutions when it comes to all things tension stringing equipment, parts, & accessories.
OPERATOR FRIENDLY
The operator has the ability to make precise adjustments and control tension using the pressure gauge and tension chart. Plus hydraulic braking uses just a single control to distribute tension between the two bullwheels.
COST EFFECTIVE
Maintaining the previous standard for excellence seen from the other models of tensioners, the TSE T100-72 is built for hard work.
EQUIPMENT DETAILS
STANDARD
The TSE Model T100/72 Bullwheel tensioner is designed to install single conductor or Fiber Optic Groundwire on transmission lines. Elastomer lined bullwheels with 2.125” grooves can handle conductors up to 2156 ACSR and provide protection to delicate fiber cables. The bullwheels are tilted for groove alignment to eliminate any twisting being imposed on the cable. The lining segments are bolted on for easy replacement in case they are worn or damaged.
Each bullwheel has two 44” diameter bronze disc brakes and hydraulic actuated calipers to apply tension to the condcuctor. Precise control of the tension is achieved by the operator with an actuator incorporating an anti-surge accumulator. The operator can monitor the tension and make precise adjustments using the pressure guage and tension chart. By using hydraulic braking from a single control the tension is evenly distributed between the two bullwheels.
A 3-roller tail fairlead with urethane lined rollers ensures that the conductor is guided from the reel stand or carrier into the first groove of the bullwheel.
STANDARD FEATURES
- Precise hydraulic control with anti-surge accumulator
- Tilted bullwheels to reduce cable twist
- 44″ bronze disc brakes
- Central elevated operators panel with tension chart
- 3 Roller tail fairlead
- Tandem axle trailer with electric brakes
- Front and rear drop-leg jacks
- Tie down lugs
SPECIFICATIONS
- Maximum continuous tension 10,000 lbs. @ 4 MPH
- Bullwheel Diameter 72 inches
- Groove Diameter 2.125 inches
- Number of grooves 5 per bullwheel
DIMENSIONS (Approx)
- Length 211 inches
- Width 89 inches
- Height 134 inches
- Weight 7,000 lbs.