Brooks Brothers Trailers’ PTB pole trailer series is designed for long life, hard use, easy maintenance, and extreme versatility. When it comes to all things pole & reel handling in the underground & overhead electric utility & telecommunications industry, we have the solutions. 


Designed with you in mind, the Brooks Brothers PTB162-15KE has an 29,500 lbs. load capacity. Built for power. The Brooks Brothers PTB162-15KE is a state of the art trailer that makes the job easier.


Maintining the previous standard for excellence seen from the other models of trailer equipment, the Brooks Brothers PTB162-15KE possess’s security and reliability.

PTB XLw Optional Rear Pullout scaled



  • Retracted and extended length adjustments: 30’/38’/47′
  • Cargo bed (inside dimensions): 39″ x 179″
  • Overall width:95″
  • Bolster height:42″

AXLES (standard)

  • Tandem 10,000 lbs. axles (Optional axles: 12K 15K)
  • Oil bath hubs
  • Electric brakes
  • Slipper spring suspension
  • Adjustable spring pads for axle alignment
  • Reinforced spring hangers with 3″ structural channel
  • (4) four – ST235/80R16 LR-E tires, 3000 lb. capacity per tire in dual application
  • (4) four – 16″ x 6″ dual wheels (8 hole on 6 1/2″ bolt circle)


  • Front Bolster: Non-adjustable 5″ double “C” fabricated bolster (95″ wide) with 21″ lever lock stanchions on extendable tongue
  • Center bolster: 5″ double “C” fabricated bolster (95″ wide) with 21″ lever lock stanchions
  • Rear bolster: 5″ double “C” fabricated bolster (95″ wide) with 21″ lever lock stanchions
  • Pole cradle: Single pole cradle at front of A-frame tongue for center pole
  • (4) four – Heavy duty ratchet-type winch binders with breaker bar
  • (4) four – 15′ long x 4″ wide x 12,000 lbs. nylon straps


  • 8″ x 6″ x 1/4″ wall extendable tongue with UHMW polyethylene wear pads
  • 6-Position adjustable hitch plate
  • 2 1/2″ Lunette eye, 42,000 lbs. capacity
  • 3/8″ x 36″ long safety chains with safety hooks to match trailer GVWR
  • Extendable tongue is attached to trailer with removable, bolt-on collar with greaseable roller for easy extending and retracting


  • 8″ structural channel A-frame tongue supports set on offset for increased strength
  • Drop leg jack at front of A-frame (12,000 lb. static load capacity)
  • Dual drop leg jacks (12,000 lb. static load capacity) on extendable tongue for dropping full load of poles


  • 8″ x 4″ tubular steel main frame
  • 10″ x 8″ receiver tube for extendable tongue
  • 8″ x 4″ tubular steel crossmembers under center and rear bolsters
  • 3″ structural C-channel crossmembers
  • 8 stake pockets for additional tie down


  • Fenders: 1/8″ steel diamond tread plate fender construction
  • One pair mud flaps

get in touch

Please enable JavaScript in your browser to complete this form.